As a Rexon Pipe Fitting representative, I would like to present the AISI 304 Stainless Steel ButtWelded Nipple Pipe Fitting. This particular pipe fitting is made out of high-quality stainless steel and connects two pipes with the same diameter. The but welded design provides a leak free joint between the pipes. The design of the nipple on the fitting allows for quick installation and removal. The material of this pipe fitting is AISI 304 stainless steel which is resistant to corrosion, durability and strength. It is most applicable in many operations that include chemical processing, food and beverage processing, oil and gas exploration. Quality is what we are proud of in Rexon Pipe Fitting. Our AISI 304 Stainless Steel ButtWelded Nipple Pipe Fitting has been subjected to quality checks and produced to suit the needs of our clients.
The AISI 304 Stainless Steel ButtWelded Nipple Pipe Fitting is a modern pipe fitting that provides a tight seal between two similar-sized pipes. It is made from a durable stainless steel material that makes it ideal for use in various situations. Rexon Pipe Fitting is committed to providing its customers with the highest quality products and services.
A Buttweld Stainless Steel Welded Nipple Pipe Fitting is a short piece of pipe with a beveled or plain end on one side and a male threaded end on the other, used to connect pipes and flanges.
A Buttweld Stainless Steel Barrel Nipple Pipe Fitting is a short piece of pipe with a beveled or plain end on one side and a male threaded end on the other, used to connect pipes and flanges.
A Buttweld Stainless Steel Hex Nipple Pipe Fitting is a short piece of pipe with a beveled or plain end on one side and a male threaded end on the other, used to connect pipes and flanges.
A Buttweld Stainless Steel Swage nipple Pipe Fitting is a short piece of pipe with one end tapered and the other end threaded or beveled, used to connect pipes of different sizes.
The specifications of Buttweld Stainless Steel Nipple Pipe Fittings are based on ASME B16.9 and MSS-SP-95, and cover dimensions, tolerances, ratings, test methods and markings for different stainless steel grades.
| Outside Diameter (OD) | 1/8″NB TO 4″NB IN |
|---|---|
| Dimensions | ASME/ANSI B16.9, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313, ASME B16.28 |
| Wall Thickness | SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS / 3mm – 40mm |
| Bending Radius | R=1D – 10D, 15D, 20D |
| Product’s Angle | square cut/plain end, threaded end, beveled end, grooved end |
| Value Added Services | Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering |
| Important Grades | ASTM A403 WP 304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L |
| Production Materials | Stainless Steel, Alloy Steel, Carbon Steel, Duplex, Nickel Alloys, Cupro Nickel, Low Temperature Steel |
| SS Melting Points | 1400-1450°C (WP304, WP304L), 1390-1440 °C (WP316L), 1370 – 1400 °C (WP316) |
The Buttweld Stainless Steel Nipple Pipe Fittings physical property is affected by the selection of stainless steel type and grade depending on mechanical features along with resistance to media.
| Property | Typical Values and Description |
|---|---|
| Melting Point | 1,371°C (2,500°F) to 1,483°C (2,701°F), depending on grade |
| Magnetic Properties | Austenitic stainless steels are typically non-magnetic, while ferritic and martensitic stainless steels can be magnetic |
| Tensile Strength | Ranges from 500 MPa to 2,000 MPa or more, depending on the grade |
| Yield Strength | Typically ranges from 200 MPa to 1,000 MPa or more, depending on the grade |
| Hardness | Measured on the Rockwell hardness scale (HRC or HRB) or the Brinell hardness scale (HB), dependent on alloy and heat treatment |
| Corrosion Resistance | Known for exceptional corrosion resistance, suitable for use in corrosive environments |
| Machinability | Varies by grade, some grades are more challenging to machine than others |
| Weldability | Generally weldable, welding procedures and filler materials influence weld quality and corrosion resistance |
| Ductility | Stainless steel is often ductile, meaning it can be stretched or bent without breaking |
| Toughness | Exhibits good toughness, absorbing energy without fracturing |
But despite this, Buttweld Stainless Steel Nipple Pipe Fittings are produced from various grades of stainless steel that provide high chemical and corrosion resistance based on the environment.
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| 304H | min. | 0.04 | – | – | – | – | 18.0 | – | 8.0 | – |
| max. | 0.10 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | |||
| Description | Price In INR (Per Piece) |
|---|---|
| ASTM A403 WP | |
| 2" X SCH 40 | 325.00 |
| 3" X SCH 40 | 400.00 |
| 4" X SCH 40 | 600.00 |
| 6" X SCH 40 | 1350.00 |
| 8" X SCH 40 | 2400.00 |
| 10" X SCH 40 | 4500.00 |
| Country | Address |
|---|---|
 UAE |
Dubai |
| UAE |
Abu Dhabi |
 Qatar |
Doha |
 Saudi Arabia
|
Riyadh |
| Saudi Arabia |
Jeddah |
 Bahrain |
Manama |
 Kuwait |
Kuwait City |
 Oman |
Muscat |
| Saudi Arabia |
Eastern Province |
| UAE |
Sharjah |
